波浪骑士数据在高度计有效波高检验中的再处理     

陈春涛  朱建华  黄骁麒  王贺  赵屹立 《海洋测绘》2013,33(3):53-55

以2011年10～11月南海现场试验得到的9次波浪骑士测量数据,进行波浪骑士再处理与默认计算结果比对。比对结果表明两者平均误差为0.16m,均方根误差为0.32m,分析产生误差的原因在于波浪骑士默认计算有效波高时间段的中心与卫星过境时间不统一和未进行数据质量控制。研究表明在卫星高度计有效波高产品检验中,波浪骑士测量的有效波高需要进行再处理,以达到减少卫星高度计有效波高检验误差的目的。  相似文献   

Present-day climatology and projected changes of warm and cold days in the CNRM-CM3 global climate model     

J. Ballester  H. Douville  F. Chauvin 《Climate Dynamics》2009,32(1):35-54

The impact of global warming on the warmest and coldest days of the annual cycle is explored according to an A2 scenario simulated by the CNRM-CM3 climate model in the framework of the IPCC AR4 intercomparison. Given the multi-model spread in IPCC projections, a validation strategy is proposed using the NCEP/NCAR reanalysis. Validation of the late twentieth century model climatology shows that warm and cold model events are slightly too long and infrequent. Although interannual trends in the warm (cold) day occurrence were positive (negative) only for six (three) of the nine considered sub-continental regions, simulated model trends are always positive (negative). This different behaviour suggests that simulated non-anthropogenic decadal variability is small relative to anthropogenic trends. Large-scale synoptic processes associated with European regional warm and cold peaks are also described and validated. Regional cold peaks are better reproduced than warm peaks, whose intensity accuracy is limited by other physical variables. Positive (negative) winter anomalies of sea and land surface temperature lead to summers with severe (weak) temperatures. These inter-annual anomalies are generated by a persistent pressure dipole over Europe. Regarding climate change, warm (cold) events will become more (less) frequent and longer (shorter). The number of warm days will largely rise and the number of cold days will dramatically decrease. The intensity of warm days will be particularly pronounced over Europe, given the projected summer drying in this region. However, according to the limited skill of the CNRM model, these results must be considered with caution.  相似文献   

利用地基微波辐射计验证积雪微波辐射传输模型     

常胜  蒋玲梅  张立新  施建成 《冰川冻土》2009,31(2):207-213

积雪雪水当量参数是水文、气候、水资源利用与管理模型中非常重要的输入参数,积雪辐射理论模型可以模拟积雪物理参数与微波辐射的关系.因此,准确模拟积雪辐射信息,验证积雪辐射模型显得尤为重要.采用改进的基于能量守恒的干雪微波辐射传输理论模型(DMRT-AIEM-MD),利用2008年3月24 日黑河地区联合实验获取的地面测量数据以及车载辐射计18.7 GHz和36.5 GHz两个频率的辐射亮温值,考虑地形的影响,分析积雪辐射散射特性以及验证该模型.结果表明:该模型模拟值与地面实测值吻合的比较好,该模型能较好的模拟中国地区自然地表积雪辐射信号.分析了部分模型模拟值和地面实测值偏差的可能原因,该积雪区是多次堆积形成,积雪垂直剖面的密度、温度不规则变化可能会引起偏差.  相似文献   

西太平洋副热带高压对华北地区降水蒸发差的影响   总被引：1，自引：0，他引：1       下载免费PDF全文

孙卫国  程炳岩  郭渠 《高原气象》2009,28(5):1167-1174

采用小波相关和交叉小波变换等方法, 分析了西太平洋副热带高压脊线和北界位置变化对华北地区降水蒸发差的影响。结果表明, 2000年以来华北区南部的水资源短缺问题有所缓解, 但以北京为中心的华北区东北部仍处于持续缺水期; 华北地区降水蒸发差与副热带高压脊线及北界位置变化相关密切, 存在年际和年代际尺度的显著相关振荡, 与副热带高压脊线的年代际尺度相关凝聚性最强; 时域中年际尺度相关存在局部化特征, 年代际尺度相关具有阶段性。分析认为, 2000年以来副热带高压脊线和北界位置偏北并维持反气旋型环流, 有利于水汽向华北输送, 使得华北降水增多, 是近年来华北中南部降水蒸发差增大的主要原因; 而东亚季风减弱不利于西南气流的水汽输送, 以及蒙古高原显著增暖导致蒸发增大等因素, 使得华北东北部仍处于持续缺水期。  相似文献   

Influence of Thermal Effects on the Wind Field Within the Urban Environment   总被引：1，自引：1，他引：0  

R. Dimitrova  Jean-François Sini  K. Richards  M. Schatzmann  M. Weeks  E. Perez García  C. Borrego 《Boundary-Layer Meteorology》2009,131(2):223-243

Micrometeorological conditions in the vicinity of urban buildings strongly influence the requirements that are imposed on building heating and cooling. The goal of the present study, carried out within the Advance Tools for Rational Energy Use towards Sustainability (ATREUS) European research network, is the evaluation of the wind field around buildings with walls heated by solar radiation. Two computational fluid dynamics (CFD) codes were validated against extensive wind-tunnel observations to assess the influence of thermal effects on model performance. The code selected from this validation was used to simulate the wind and temperature fields for a summer day in a specific region of the city of Lisbon. For this study, the meteorological data produced by a non-hydrostatic mesoscale atmospheric model (MM5) were used as boundary conditions for a CFD code, which was further applied to analyze the effects of local roughness elements and thermodynamic conditions on the air flow around buildings. The CFD modelling can also provide the inflow parameters for a Heating, Ventilation and Air Conditioning (HVAC) system, used to evaluate the building energy budgets and to predict performance of the air-conditioning system. The main finding of the present three-dimensional analyses is that thermal forcing associated with the heating of buildings can significantly modify local properties of the air flow.  相似文献   

A comparison of MODIS-derived cloud amount with visual surface observations   总被引：6，自引：0，他引：6  

Andrzej Z. Kotarba   《Atmospheric Research》2009,92(4):522-530

Two main sources for global cloud climatologies are visual surface observations and observations made by spaceborne sensors. Satellite observations compared with surface data show in most cases differences ranging from − 15% up to − 1%, depending on sensor and observation conditions. These differences are partially controlled by sensors' cloud detection capabilities — a higher number of spectral bands and higher spatial resolution are believed to allow discrimination of clouds from land/ocean/snow background. A Moderate-Resolution Imaging Spectroradiometer (MODIS) produces images of the atmosphere in 36 spectral bands with a spatial resolution of 250–1000 m, thus having a capacity for cloud detection far more advanced than other operating sensors. In this study, instantaneous MODIS cloud observations were compared with surface data for Poland for January (winter) and July (summer) 2004. It was found that MODIS observed 4.38% greater cloud amount in summer conditions and 7.28% in winter conditions. Differences were greater at night (7–8%) than in daytime (0.5–7%) and correlations ranged between 0.577 (winter night) and 0.843 (winter day, summer day and night).  相似文献   

遥感数据产品真实性检验不确定性分析研究进展   总被引：1，自引：1，他引：1  

吴小丹  肖青  闻建光  刘强  彭菁菁  李小文 《遥感学报》2014,18(5):1011-1023

不确定性分析是遥感产品真实性检验最重要的部分,本文以叶面积指数LAI为例,从测量、模型以及蕴含在测量和模型中的尺度效应3个方面分析产品真实性检验过程的不确定性来源,并针对问题提出减小其不确定性的办法。对于相对均一的地表,地面测量的空间代表性比较好,可不考虑地表空间代表性引起的尺度效应和蕴含在模型中的尺度效应引起的不确定性。针对异质性地表,分为两种情况:若模型是线性的,蕴含在模型中的尺度效应可以忽略,只需要考虑测量的不确定性、模型本身的不确定性、以及地面测量的空间代表性引起的尺度效应;若模型是非线性的,则测量、模型和蕴含在测量和模型中的尺度效应引起的不确定性都需要考虑。  相似文献   

一个观察北极涛动与北大西洋涛动关系的典型个例   总被引：1，自引：0，他引：1  

赵南  王启祎 《气象学报》2010,68(6):847-854

北极涛动与大西洋涛动是否属同一气候变率模态一直是北极涛动动力学研究方面的一个颇具争议的话题。文中通过对"0801南方雪灾"期间及其前后北极涛动与北大西洋涛动异常及产生原因进行个例分析,对两者之间的关系进行了讨论。首先使用交叉子波变换与子波相关方法分析了两者的相位关系。发现在30—60天时间尺度上北极涛动与北大西洋涛动相位相差90°或-90°。而在10 20天这一尺度上北极涛动与北大西洋涛动具有大致相同的相位。对北极涛动及北大西洋涛动形成的动力过程及其在拉尼娜背景下各自特点的分析表明,这种不同尺度上位相关系的差异来自于波-流相互作用动力学的局域性。众所周知,北极涛动的3个活动中心的形成与分别位于北大西洋、北太平洋和北极平流层的3个波流相互作用中心有关。而北大西洋涛动则主要与位于北大西洋的波-流相互作用中心有关。拉尼娜事件的出现通过影响太平洋急流及行星尺度的准定常波从而进一步强化了30-60天时间尺度上北极涛动与北大西洋涛动的这种差异。这主要是因为太平洋急流或准定常行星波在对流层中直接影响了位于该区域的北极涛动的活动中心。同时准定常行星波冬季向上传播至平流层并与平流层极涡相互作用从而也影响了北极涛动在北极的活动中心。而在10—20天时间尺度上的北极涛动与北大西洋涛动同步关系则说明它们都是北极涛动的另一活动中心即大西洋上同一波-流相互作用现象——天气波破碎的反映。基于上述分析.文中倾向于认同将北极涛动和北大西洋涛动区别考虑的观点。  相似文献   

风云三号C星微波湿温探测仪的定标和验证   总被引：6，自引：0，他引：6       下载免费PDF全文

郭杨  卢乃锰  漆成莉  谷松岩  许健民 《地球物理学报》2015,58(1):20-31

风云三号C星(FY-3C)已经于2013年9月23日发射升空,其上装载的微波湿温探测仪(MWHTS)已于9月30日开机正常工作.MWHTS具有对大气温度和湿度垂直分布进行同步探测的能力.MWHTS为跨轨扫描式微波辐射计,在89~191GHz毫米波段内设置了十五个探测通道,其中包括118.75GHz氧气吸收线附近的8个大气温度探测通道,183.31GHz水汽吸收线附近的5个大气湿度探测通道,以及89GHz和150GHz两个窗区通道.设置在118.75GHz的一组毫米波探测通道是国际上业务卫星首次使用的大气探测通道,这组通道和183.31GHz通道对大气进行联合探测,将获得更加精细的大气温湿度垂直分布数据,为数值预报和气候研究提供丰富信息.为保证MWHTS观测资料的定量应用,对仪器性能和定标精度进行了在轨测试.利用MWHTS在轨正常工作后的三个月数据,对仪器在轨定标的基础数据:冷空和黑体计数值,黑体和仪器温度进行监测分析和质量检验,经过质量检验的在轨定标基础数据,结合发射前真空试验得到的非线性订正项在轨定标生成MWHTS观测亮温数据.评估MWHTS在轨辐射定标结果的精度和偏差特性使用了三种方法:1通过场地定标试验获取大气温湿廓线和地面温度等大气参数信息,结合微波逐线正演辐射传输模式MonoRTM(Monochromatic Radiative Transfer Model)模拟MWHTS的上行微波辐射亮温,与MWHTS实际观测结果进行对比分析;2两个通道特性一致的同类星载被动微波载荷同时观测同一目标,观测亮温的差异主要取决于两个载荷的定标系统偏差.选取美国SNPP上搭载的微波探测仪器ATMS作为MWHTS的参考载荷,基于SNO(simultaneous nadir overpass)技术,对两个仪器的观测亮温进行交叉比对,观测亮温时空匹配及均匀性检验的条件为:观测时间差异小于20min,观测像元中心距离小于3km,观测角度在星下点附近差异小于5°,观测像元周围3×3像元内的亮温标准差小于1K;3基于美国国家环境预测中心的全球数据同化系统GDAS(Global Data Assimilation System)数据,利用快速辐射传输模式CRTM(Community Radiative Transfer Model)对MWHTS各通道亮温进行正演模拟,模拟结果(O)和仪器实际观测的亮温(B)之间的差异记为"O-B",对偏差值"O-B"进行统计特征分析.仪器中心频率的变化、正演模式模拟精度和模式输入廓线自身的误差都会对"O-B"产生影响.但是对于首次使用的探测频点而言(如118.75GHz通道),由于国际上没有同类载荷可以进行交叉比对,借助于正演辐射传输模式计算得到"O-B"偏差的分析结果可以在一定程度上反映仪器整体定标情况.外场地定标试验结果显示除通道14外,其他14个通道的亮温差都在1.3K以内;与同类载荷ATMS的在轨观测进行直接交叉比对表明通道14与ATMS的亮温偏差最大,但中心频点一致的5个水汽探测通道的标准差都小于1K;将MWHTS观测结果和正演辐射传输模式模拟结果即"O-B"进行偏差分析显示,靠近118.75GHz吸收线中心的通道2—6"O-B"标准差小于0.5K,其他通道"O-B"标准差和ATMS相应通道的结果相当;MWHTS观测和模拟偏差随角度变化的研究表明通道1,7~13和15观测结果对角度有一定依赖性.  相似文献   

Dynamic FE simulation of four‐story steel frame modeled by solid elements and its validation using results of full‐scale shake‐table test          下载免费PDF全文

Tomoshi Miyamura  Takuzo Yamashita  Hiroshi Akiba  Makoto Ohsaki 《地震工程与结构动力学》2015,44(9):1449-1469

Dynamic finite element analyses of a four‐story steel building frame modeled as a fine mesh of solid elements are performed using E‐Simulator, which is a parallel finite element analysis software package for precisely simulating collapse behaviors of civil and building structures. E‐Simulator is under development at the National Research Institute for Earth Science and Disaster Prevention (NIED), Japan. A full‐scale shake‐table test for a four‐story frame was conducted using E‐Defense at NIED, which is the largest shaking table in the world. A mesh of the entire structure of a four‐story frame with approximately 19 million degrees of freedom is constructed using solid elements. The density of the mesh is determined by referring to the results of elastic–plastic buckling analyses of a column of the frame using meshes of different densities. Therefore, the analysis model of the frame is well verified. Seismic response analyses under 60, 100, and 115% excitations of the JR Takatori record of the 1995 Hyogoken‐Nanbu earthquake are performed. Note that the simulation does not reproduce the collapse under the 100% excitation of the Takatori record in the E‐Defense test. Therefore, simulations for the 115% case are also performed. The results obtained by E‐Simulator are compared with those obtained by the E‐Defense full‐scale test in order to validate the results obtained by E‐Simulator. The shear forces and interstory drift angles of the first story obtained by the simulation and the test are in good agreement. Both the response of the entire frame and the local deformation as a result of elastic–plastic buckling are simulated simultaneously using E‐Simulator. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献